Brzi ljepilo za papirne kutije

Automatsko ljepilo za mape s 4/6Corner

Model: LG800C (osim sustava ljepila u spreju)

Automatski stroj za preklapanje kartona (LG800) vrlo je stabilan-stroj velike količine koji može donijeti više profita kupcima.

Ima funkciju 4/6 kuta. Svaki set je kontroliran neovisnim motorom. Koristi ESC, PLC, uvezene elektroničke komponente i tri-opremu za praćenje ploča.

Glavne značajke

1) Cijeli stroj ima strukturu laserski-rezanih čeličnih ploča.

2) Sustav za prskanje{1}}ljepila (tri pištolja i tri senzora) po izboru.

3) Unutarnje kurire u stroju podešavaju motori.

4) Plazma sustav po izboru.

5) Podaci obrade kutija mogu se pohraniti u računalni upravljački sustav (opcija).

6) Indikator položaja (opcionalno)

7) Promjenjivo podešavanje.

8) Pred-preklopni dio za-duže udaljenosti, preklop za 180 stupnjeva za prvu liniju, 135 stupnjeva za treću liniju, lako se otvaraju nakon prethodno-savijanja.

Specifikacija:

Veličina papira

◆ straight line box WL: max 800800 mm min 9060 mm

◆ lock bottom box WL: max 700800 mm min 15060 mm

Feeder

◆ MIKI-pulley infinite speed variator 1/set.

◆ Independent adjust feeding belt, ensure the smoothly paper feeding.1set/6pcs,size: 1026308mm

◆ Independent motor, inverter adjust speed, effectively ensure the balance of paper spacing.

◆ Paper carry rod with high performance Taiwan-made vibrating motor.

◆ Air feeding device.(optional)

Poravnanjejedinica

◆ Aligning the askew paper wihch from feeder, make sure the paper running in straight line.

◆ Alignment unit can be adjusted up and down, suitbale for different thickness paper stably.

◆ correct the paper, avoiding the paper going to two sides.

Dva remena: 2145344mm

Pred{0}}sklopiva jedinica

◆ 2 plate conveyor belt structure, segmenting left and right upper belt plate can be adjusted according to product demand, fast and efficient.

◆ three long top courier in this section, 180 degree folding could be preformed

Nitta pojasevi: 1 set

specifikacije: 1985243mm-2kom 3375243mm-2kom

5000444mm-1kom 5000244mm-1kom 4755304mm-1kom

Jedinica za zaključavanje{0}}

◆ 3 plate conveyor belt board structure, segmental upper belt board function is the same as the prefolding part, eliminate the problems in the production of special-shaped box products effectively.

◆ The upper and middle belt board is detachable, depending on product requirements for disassembly and debugging.

◆ Nitta belts 1set /9 pcs

Specifikacija:

1985243mm-2kom 3375243mm-1kom

1780243mm-2kom 3450244mm-3kom

3610304mm-1kom

◆ Safety door (Optional)

Jedinica za lijepljenje

◆ The mechanical lower pasting cylinder is designed with separate type of rubber wheel and rubber cylinder, high speed, easy to clean and maintain.

◆ Crashlock, 4/6 corner box ,etc need to equip eletrical spray guns. (recommend 3 or more guns)

◆ width of gluing wheel 4MM (standard), other width could be customized

Preklopna jedinica

◆ 2 plate conveyor belt board structur.

◆ The left and right outside folding belt speed can be adjusted independently to ensure the molding accuracy.

◆ Wide box type can be matched with middle upper and lower belt plate to ensure stable transportation.

◆ Nitta belts 1set /8pcs

Specifikacija:

2785243mm-1kom 4565243mm-1kom

3175243mm-1kom 7320344mm-3kom

7520354mm-2kom

Pritiskomjedinica

◆ Independend inverter adjust speed, proportional linkage to main engine under automatic model, adjusting separately with the same speed as the main engine under manual.

◆ Upper and lower belt telescopic adjustment is simple and easy to operate.

◆ Equipped with high speed electronic kick counter.

Transportna jedinica

◆ In automatic mode, the paper box spacing is set. The pressure belt speed is connected with the belt speed of the main engine in proportion. When photoelectric monitoring the paper box, the leather moves.

◆ In manual mode, the pressure belt is delivered at a constant speed, which is not affected by the machine speed.

◆ The pressure part adopts the pressure type pressing, the pressure control is more accurate, the product bonding effect is more guaranteed.

Funkcija 4/6 kuta (opcionalno)

◆ All types and most sizes of 4/6 corner boxes can be quickly set up.

◆ the inclined frame according to the page size of the paper box adjustable.

◆ 45 degrees guide plate, suitable for all the size of the paper box.

◆ modular folding hook running track, high speed and high quality production.

Električni i pogonski sustavi

◆ Schneider brand inverter is used to realize synchronous speed regulation of the main engine, making the speed change, adjustment, stability and reliability.

◆ Humanized design of hd touch screen, fully consider the operator's convenience.

◆ Schneider brand PLC is adopted, and a number of safety protection devices are added, making the operation of the machine more safe and reliable.

◆ Control panel, layout more reasonable, icon prompt, simple and easy to understand with remote control switch, make the operation more convenient.

Popis glavnih dijelova

1.Električni dio

2.Pojas

3.Pneumatski element

UZORCI KUTIJA

Popularni tagovi: brzi ljepilo za papirne kutije, Kina, dobavljači, proizvođači, tvornica, prilagođeno, cijena, na zalihama